Packing Wheel Bearings

There are bearings on the inner and outer side of the hub to properly support the wheel. Here are the basics of packing wheel bearings on a trailer with drum brakes.

How To Pack Wheel Bearings And Change Bearing Races Racingjunk News

To pack the wheel bearings place the clean bearing inside of a plastic zip lock bag along with a liberal amount of new wheel bearing grease.

Packing wheel bearings. A cars wheels rotate on tapered-roller bearings which fit between the stationary axle spindle and the rotating wheels hubbrake mechanism. Ad Quality Bearings Online with Competitive Price. AP3708 v 07 7 15 sn02 tb 15CTA2.

A quick and easy way to pre-lube a bearing before installation using nothing but your bare hands. Here is a thread about the old school stringy stuff. Make sure that you insert the seal just below the snap ring groove and not further.

This is because moving the bearings out and into the hub can be tight. What is cleaning and repacking the wheel bearings all about. How to Grease Pack Trailer Wheel Bearings.

Any type wheel bearing grease will work. Remove the dust cap. Depending on how much you use your trailer and how many miles you get on it you can wait till about 20000 miles before your wheel bearing has to be repacked.

Get it as soon as Thu Apr. Put the sharp side of the snap ring facing up against the pressure. Remove the wheel and tire.

46 out of 5 stars 6. Grab a bearing and press it into the grease working your way around the larger end until you see grease forced through to the smaller end. Pack those suckers real good then install them in the hub.

Back the retaining nut off and wiggle the hub assembly to loosen the outer bearing on the axle. Trusted China Suppliers Verified by SGS. Jack up the axle and safely support it.

This allows you to work the grease into each small wheel and bearing without causing a lot of mess outside of the work area. That being said packing your trailers wheel bearings can be an arduous task to do if you do not have a press. Pack It Up Pack It In Grab a pair of disposable gloves and squirt a palm-full of manufacturer-recommended bearing grease into one hand.

Trusted China Suppliers Verified by SGS. Trailer-In-A-Bag Example - YouTube. Packing a bearing with grease by hand or even using a traditional bearing packer works but it puts way too much grease in the bearing which actually adds drag.

VCT Universal AUTO CAR Grease Wheel Bearing Pack Packer Packing AUTO GREASING Tool. Remove the cotter pin. All of these bearings require care.

Ad Quality Bearings Online with Competitive Price. To replace the entire bearing and hub as a whole would be. These are greased when installed but the grease.

Repacking Trailer Wheel Bearings Diy Family Handyman